Research
- 2-phase, hybrid stepper motors
- Holding torques from 0.45 Nm to 17 Nm (64-2410 oz-in)
- Diameters: 56-107 mm
- NEMA compatible
- Optional: gear, motor brake, encoder, 2nd shaft, coupling, etc.
learn more
- 2-phase, hybrid step motors
- Holding torques from 3.8 mNm to 700 mNm
- Standard number of steps: 200
Special step width depending on the motor sizes: 8, 24, 56, 72, 500 - Diameters: 19 to 56 mm
- Optional: gear, motor brake, encoder, 2nd shaft, heat sink, coupling, etc.
- Stepper motor controller with integrated power stage for SIMATIC ET 200S®
- For 2 phase stepper motors
- 5 APEAK at 24 to 48 VDC
- Up to 1/512 microsteps
- Online controller parameterization and diagnostics
- STEP 7® programming
- Stepper motors for extreme ambient conditions
- Vacuum applications up to 10-11 hPa
- Temperature range from –20 to +300 °C
- Radiaton resistance 102 to 106 J/kg
- Special models for clean room operation
- Optional: gear, coupling, 2nd shaft, temperature sensor, etc.
Housing
- Bench, rail, sub rack or wall mounting
- Main- and intermediate supply module 24 to 70 VDC
- Controls and administers up to 64 modules
- Programm and register memory up to 4 MB
- Internal memory expandable with future memory modules
- Selectable: RS 485, RS 232, RS 422, CAN, Ethernet, ProfiBus/ProfiNet
- 4 Axes High End Indexer
- Indexer Interface
- Digital I/O
- Analogue I/O
- Integrated Touch Panel
- Customised
- Freely programmable 2-axes stepper motor controller
- Phase currents up to 3.5 APEAK
- Supply voltage 24 to 48 VDC
- 8 digital inputs/8 digital outputs, 1 analog inputs, 2 encoder inputs,
redundant motor enable input - USB, RS 485 or RS 232 interface
- Programming in the well-tried MiniLog format
- Freely programmable one-axis stepper motor controller
- Phase currents up to 3.5 APEAK
- Supply voltage 24 to 48 VDC
- 8 digital I/O, 1 analog input, 1 encoder input, redundant motor enable input
- USB, RS 485 or RS 232 interface
- Programming in the well-tried MiniLog format
- Freely programmable 2-axes stepper motor controller with linear power stages
- Best fit for extremely fine positioning and EMC-sensitive environments
- Phase currents up to 1.7 APEAK
- Supply voltage 24 to 48 VDC
- Step resolution up to 1/256 step
- USB, RS 485 or RS 232 interface
- Suitable for low temperatures: He (-269 °C) or N2 (-196 °C)
- Ultra high vacuum applications up to 10-11 mbar
- Radiation resistance up to 106 J/kg
- Stainless steel housing
- Customised design: Titanium housing - Space - Reduced magnetic emission
- Virtual instruments for Phytron stepper motor controllers of the MCC series
- Graphical programming language for WINDOWS®
- Demo VIs for commonly used applications
- 15 to 30 mm in diameter
- Bore for mounting the motor shaft: 3 to 12 mm
- Maximum permissible torque: 0.71 to 4 Nm
- Absolutely backlash-free
- Stepper motors for operation in harsh environment
- Temperature range –40 to +150 °C, up to +180 °C with internal air cooling
- Protection mode IP68
- Holding torques from 0.1 to 5 Nm
- Diameters 55 to 120 mm
- Integrated cooling fins
- Optional: gears, internal air cooling
All fields of application at a glance